Скачать с ютуб Autocad Civil 3D - Farklı Eğim ve Yüksekliklerde Palye Hendekli Şevlerin Oluşturulması в хорошем качестве

Autocad Civil 3D - Farklı Eğim ve Yüksekliklerde Palye Hendekli Şevlerin Oluşturulması

Bench Ditch with Different Slope and Height Contact for assembly: [email protected] Palye Hendekli Şev (V Kesitli ve Trapez Kesitli) - Daylight Bench:    • Autocad Civil 3D - Palye Hendekli Şev...   Linkedin Account:   / civil-3d-designer-76a248299   OPERATIONAL STEPS Objective: To draw a simple road project with different slope inclinations and slope heights and perform the calculations. 1. Create a simple road with a width of 10 meters and slopes as follows: The first cut slope with a slope inclination of 1:1 and a slope height of 15 meters. Other cutting slopes with a slope inclination of 3:2 and a slope height of 10 meters. Fill slopes with a slope inclination of 2:1 and a slope height of 10 meters. 2. Create a corridor. Lines where the corridor meets with the existing surface will be marked in red for cut section and green for fill section. 3. Examine the sections by controlling the plan and cross-sections to determine which sections need correction. 4. Correct the sections that are found to be erroneous using the "Section Editor." 5. Create a datum surface and calculate the normal excavation/fill volume. 6. Calculate the concrete and excavation volume for the bench ditch in the cut section. 7. Calculate the stripping excavation separately for the cut and fill sections. The stripping excavation height will be 50 cm. 8. Create application points for the datum surface.