Yogurt production line - how to maker yogurt? - yogurt processing machine скачать в хорошем качестве

Yogurt production line - how to maker yogurt? - yogurt processing machine

Please click here for more information: https://taizyfoodmachines.com/yogurt-... Email address: [email protected] Wechat / Tel / WhatsApp: +86 17303821432 1. This is the electric control box of the refrigerating tank. These three are the fire line, which is the zero line. 2. The room temperature is displayed on the control panel. 3. Press the select button, and hold on for five seconds, and it will display the upper-temperature limit, and then press again to display the lower temperature limit. 4. The up and down arrows are respectively for increasing temperature and decreasing temperature. 5. If the milk is stored normally, the mixer and compressor can be turned on automatically. 6. Wiring of preheating tank. These three are fires wires. This is the zero wire. 7. This is the heating button, this is the mixing button, this is the milk pump switch of the preheating tank. 8. This is the temperature setting key. The two buttons on the right are the temperature up and down adjustment buttons. 9. Add lubricating oil before using homogenizer. 10. Observe from the window, when the oil volume reaches half, it can be used. 11. Adjust the pressure regulating valve below to about 8 on the pressure display. 12. The upper-pressure valve can work normally when it is adjusted to the pressure display of about 17. 13. Turn on the homogenizer switch. 14. This is the electric control box for the homogenizer, sterilizer, and fermenter. 15. This is three fire lines, this is the zero line. 16. This is the power switch, turn on the homogenizer switch. 17. The sterilization temperature is 85 degrees, the fermentation temperature is 43 degrees, and the fermentation time is 8 hours. 18. After the setting is completed, turn on the sterilization switch and sterilize and stir. 19. After reaching this temperature, the sterilization is completed and the milk pump is turned on. 20. Milk enters the fermentor. 21. Turn on the fermentation switch and the machine starts timing. 22. After the fermentation is completed, the machine will automatically alarm. 23. When the equipment starts working, turn on the water and electricity. 24. Make the water level of preheating tank, sterilization tank, and fermentation tank reach the place where the liquid level gauge can see. 25. Add lubricating oil to the homogenizer. 26. After that, turn on the machine one by one according to the process. The filling can be done after the fermentation is completed. Thanks for watching, if you are interested in this machine, please contact us.