У нас вы можете посмотреть бесплатно EVOLV KICK или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
The KICK from Evolv is adropin device for an 18650 or 18500 device to make youhave the adjustable wattage control of the Darwin. This little dream goes from 5 to 10 watts and is made to use with adies or carto'sfrom 1.3 to 3 ohms and to use with IMR batteries, it is 15mm high and mae to be used in a device with a 19.5 mm max internal diameter. The Kick will also make you device safer because of its safe like short ciruit protection, low volltage cut off so you can not draw the IMR batteries below a safe level, and overvoltage protection, they are meant to be installed in to you device on top of the poss post of you battery. You adjust the waatage setting with a small screw driver with the pot on the top of the Kick once you have found your sweet spot the Kick will give you your sweet spot on every vape no matter what the volts are in you battery from the 4.2 volts ( freshly charged ) right down to the low vot\ltage cut off at (3.4 volts ) just above the cut off of protected bateries,so not chance of hurting you or your batteries. As you change you addies or carto's from 1.3 all the way up to 3 ohms your sweet spot will not change because the Kick will all ways put out the wattage youhave it set to. I was one of those people that loved a freshly charged battery vape and would swap out my batteries around 3.6to 3.8 volts because I would find the vape and taste getting weak but now with the Kick in my devices I will vape the same battery from 4.2 till the Kick stops putting out the voltage,wattage and amps because of the 3.4 cut off. itch to me means not having to carry as many batteries, not having to be changeing batteries all the time to keep my sweet spot! The Kick has taken over that job for me. I do use it with dual coils at 1.5 ohms and get about 4.2 volts out of my Precise's from Supper T Manufacting and I enjoy it with every addy or carto I have tried it with So haope you enjoy my reveiw. And as all ways I bought both of the Kicks I own and my Darwin I am doing this reveiw to help other people out and am in no way getting paid or free stuff from Evolv for doing this so please check out my video and any questions or coments leave down below and I will do my best to answer you.