Mixer's installation on two screws and semicircle | BAQ2 Model | FERRO GROUP скачать в хорошем качестве

Mixer's installation on two screws and semicircle | BAQ2 Model | FERRO GROUP

Let's start the installation by checking the set contents. Prepare a flat-blade screwdriver and a set of wrenches. Screw flexible connection hoses into mixer sockets. Perform the operation manually until resistance is felt, use an open-end wrench can damage the hoses. Screw 2 fixing screws into the mixer body using a flat-blade screwdriver. Apply an O-ring on the underside of the body to seal the space between the mixer and the washbasin. Insert the mixer into the mounting hole in the washbasin. Apply a crescent shaped rubber and metal washers to the fixing screws from below. Screw the nuts on with a wrench so that the mixer is securely attached and does not move. Tighten the hoses to the valves with cold water on the right and hot water on the left. Open the water supply on the angle valves, rinse the mixer with cold and hot water and check the tightness of the connections. Visit our webiste and discover FERRO products: https://www.ferrocompany.com/