У нас вы можете посмотреть бесплатно Moldlab Pro Kit Air Sampling Instructions или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Learn how to use the Moldlab Pro Kit to provide mold testing services to your home inspections. Understand how and where to take surface samples to better serve your customers and improve your business. Ready to buy? Click here: https://www.moldlab.com/product/pro-kit Want to know more about the Pro Kit? Visit its page on our website: https://www.moldlab.com/prokit Overall Kit Instructions: • Moldab Professional Mold Test Kit Instruct... Need a pump? Buy one here: https://www.moldlab.com/product/thoma... Surface sampling instructions: • Moldlab Pro Kit Surface Sampling Guidance Kit FAQ: https://www.moldlab.com/prokit#faq Introduction: (0:00) House Conditions: (0:59) Sampling Location Guidance: (2:52) Air Sampling Instructions: (6:17) Thomas Mega-Lite Pump: (8:10) Buck Bioaire: (10:33) Report: (13:22) Outro: (20:40) Step-By-Step Instructions: 1. If your pump has a nozzle, attach 1/4" ID tubing to the nozzle. This is not necessary if you can attach your cassette directly to your pump. 2. Write a number on your cassette matching a number from the Test Kit Form. Write a location description for your sample on the corresponding number's line on the form. 3. Turn on your pump and allow it to run for 1-5 minutes so the flow rate can stabilize. 4. Remove the top and bottom Quality Seals from your cassettes. You will need them again later. 5. Attach your cassette to your pump and start a timer for 5 minutes, or your desired sampling time. 6. Adjust the flow rate of your pump to 15 liters per minute. 7. Once time is up, turn off your pump and write down the exact start and stop times for your sample onto the Test Kit Form. 8. Disconnect your cassette from the plastic tubing. You do not need to remove the plastic tubing from the pump. 9. Replace the Quality Seals on the cassette and place it in the return mailer. 10. Repeat Steps 2-9 for each sample you wish to take.