Replacing the Wall Control on a Garage Door Opener скачать в хорошем качестве

Replacing the Wall Control on a Garage Door Opener

This video from Sears PartsDirect shows how to replace wall control on a garage door opener. The wall control is mounted inside the garage, next to the door leading into the house. It opens and closes the garage door, and switches on the light on the garage door opener. If you push the control button and get no response from the door, the control is likely defective. You can replace it using the steps in this video. If you have to hold down the control button until the door closes completely, the problem likely is with the safety sensors. Here is a link to our safety sensor replacement video. Visit us at: https://www.searspartsdirect.com?sid=... Or call 1-800-437-1673 to speak with a parts specialist. The video includes these parts and tools. Look up your model to make sure you get the right parts for your garage door opener. Wall control https://www.searspartsdirect.com/part... Find parts for your garage door opener at https://www.searspartsdirect.com/part... Or click here to schedule an appointment with a repair technician. https://www.searshomeservices.com/rep... Transcript: The wall control is mounted inside the garage, next to the door leading into the house. It opens and closes the garage door, and switches on the light on the garage door opener. If you push the control button and get no response from the door, the control is likely defective. You can replace it using the steps in this video. If you have to hold down the control button until the door closes completely, the problem likely is with the safety sensors. Here is a link to our safety sensor replacement video. Wear work gloves to protect your hands. Now, let’s get started. Unplug the garage door opener. Or, turn off the house circuit breaker for the garage door opener. Push down on the control button locking tabs, and then pull the control button off the old wall control. Remove the top mounting screw. Pull the wall control up slightly then outward to release it from the bottom mounting screw. Loosen the wire screws and disconnect the wires from the back of the wall control. Connect the wires to the back of the new wall control. Attach the red-striped wire to the terminal marked red and the white wire to the terminal marked white. Push the slot on the wall control onto the bottom mounting screw and slide the wall control downward to lock it in place. Install the top mounting screw. Reinstall the control button on the new wall control. Plug in the garage door opener. Or, turn on the house circuit breaker.