AC Type 1 Surge Protective Device SPD assembling скачать в хорошем качестве

AC Type 1 Surge Protective Device SPD assembling

AC Type 1 Surge Protective Device SPD Assembling https://lsp.global/type-1-surge-prote... Type 1 AC Surge Protection Devices (SPDs) are heavy-duty devices designed to be installed at the origin of AC installations equipped with a Lightning Protection System (LPS). According to the electrical installation standards, if a lightning rod is used on a building, a type one SPD must be installed inside the main electrical panel. An electrical certification is necessary to operate inside electrical cabinets. Before starting, the installation must be switched off. A voltage controller is used to ensure that the electrical system is no longer energized. We will install a LSP Type 1 surge protective device (SPD) and its associated disconnector. In accordance with the installation standards and guides, the AC power surge protective devices (SPDs) must be protected against possible short circuit end-of-life. For this reason, We will associate in the SPD branch, the disconnector equipped with the fuses. This video demonstrates the Type 1 surge protective device (SPD) assembling. 00:01 How to assemble Type 1 surge protective device FLP25 series. 00:08 Inspect and select matched Metal Oxide Varistor, adopting two stacked MOV for type 1 SPD. 00:19 Solder the MOV onto the terminal. 00:29 Place the dual-claw contacts into the base. 00:34 Place the semi-finished product into the fixture. 00:38 Solder the separation point with low-temperature solder. 00:46 Inspect MOV again. 00:52 Install the remote terminal into the base. 00:59 Weld the three wires of the remote terminal to the circuit board. 01:07 Fix the circuit board on the base cover. 01:16 L-pole assembled. 01:22 Inspect Gas Discharge Tube. 01:33 Connect the terminal on both sides of GDT. 01:52 Place the GDT contacts into the base. 01:59 Inspect GDT again. 02:03 Laser Marking on the surge protective device. 02:06 Install the fixing bar and busbar. 02:21 Inspect the finished product after assembly. 02:28 Place the SPD, instruction manual, and remote terminal into the inner box. 02:33 Attach the product label. 02:37 Place the paper box into the corrugated cardboard box, packaging is complete. 02:42 LSP, reliability in surge protection. ---------------------------------------------------------------------------------------------------------------------------------------------------- Since 2010, LSP has been dedicated to designing and manufacturing surge protective devices protecting installations from transient overvoltages that result from switching events and lightning strikes. ---------------------------------------------------------------------------------------------------------------------------------------------------- Wenzhou Arrester Electric Co., Ltd. Email: info@lsp.global Website: https://lsp.global Address: 5th FL, No. 888 Liujiang Road, Liushi, Yueqing 325604 Zhejiang, China