Скачать с ютуб Kyosho 4x4 Electronics Swap Kit Installation в хорошем качестве

Kyosho 4x4 Electronics Swap Kit Installation

This is a step by step walk through for using my 3d printed Kit (available on ebay) for replacing the standard Kyosho 4x4 electronics with a regular ESC, RX, and Micro Servo. The primary objective was to get a regular Micro Servo into the kyosho 4x4 to help with steering. But since almost everything is integrated (battery tray, servo, shock towers, etc.) then it's petty much everything that has to be replaced. I installed some cheap servo i already had, a small brushed ESC, a 4 channel receiver, and a small 250mah 7.4v lipo. The kit for the mounting plates are here: http://ebay.us/msBCPn?cmpnId=5338273189 UPDATE: i've found a couple of the Hitec servos that fit very well, the Hitec Digital Micro Metal Gear Servo HS-5055MG fits really well, it's almost identical in size to the Dromida servo i used in the video, and it comes with a servo head that you can easily attach the kyosho ball joint to, so i totally recommend it for this build. I also found that the Hitech HS-65HB fits really good, it's not metal gear but it fits and is slightly smaller with plenty of power. There's also a small emax (not sure of spelling) that works well and you can generally find for around $10. For any of my upgrades and accessories please visit my etsy and ebay stores: 3D Sleekun Designs and RC Etsy Shop: https://www.etsy.com/shop/3DSleekun Ebay Shop: https://www.ebay.com/str/3dsleekundes... I also sell other accessories like the roof rack and Light bar etc. so be sure to check out my other listings for all the goodies! Thank you so much for watching! Hex Adapters Wheel Extenders Roof Racks and Lights Scale Accessories and more!