HOW TO FIX A LEAKING SHIMANO BRAKE LEVER скачать в хорошем качестве

HOW TO FIX A LEAKING SHIMANO BRAKE LEVER

This video shows how to fix leaking problem on a M9000 brake lever, the problem is the piston inside, I am pretty sure most if not all shimano brake levers use the same piston, I am pretty sure this will work on m7000 m8000 m9000 and m785 series as well but I am not totally sure on the m7100 m8100 and m9100 series, they are the newest series and I cannot find info on the piston size but I heard they use different sizes so those new versions would probably need a different o-ring size Getting to the piston is a little different with Shimano Servo Wave levers, here are a couple of links showing how to disassemble and reassemble them, they are not the clearest but they are the best I could find, will also link a short which has good picture quality of the inside (NOTE: if the piston gets stuck because the o-ring is too tight you can only remove it in two ways, either by the way I show in the video with the pick, and if its too tight you can remove the nut and hose on front of lever and push it out through the little hole)    • Shimano Deore XT M8000 Brake Lever Ma...      • STUCK  LEVER PISTON REPAIR | DEORE XT...      • Shimano XT M8000 Lever Overhaul - Com...      • When a SHIMANO Brake Lever is Disasse...   Here are the links for the two different orings, first link choose 10x5x2.5mm , second link choose 9x5x2mm They are from the same seller so you should save a little on shipping of buying both from them at same time in shopping cart (10x5x2.5mm) https://vi.aliexpress.com/item/100500... (9x5x2mm) https://www.aliexpress.com/item/10050... Music Credit Artist(s): Filo Starquez Track: The Shack    / @filostarquez   Mineral Oil Seals Pads Piston Plunger Clip Bleed DIY Do It Yourself Guide Air https://www.buymeacoffee.com/frobo64v