How to Properly Install an O-Ring in a Face Seal Gland | Parker скачать в хорошем качестве

How to Properly Install an O-Ring in a Face Seal Gland | Parker

Installing an O-ring in a face seal gland is among the easiest of all installations. However, that doesn't mean that there's no potential for errors. Follow these tips and you'll ensure a successful install of the o-ring in the face seal gland. The most important variable for installing an O-ring into a face seal is making sure the seal is sized properly. Refer to the O-Ring Handbook or consult a Parker Applications Engineer for assistance in sizing O-rings to face seal glands. If the O-ring is too small, once installed it will potentially walk up the side walls of the gland and become pinched when the mating faces meet. If the O-ring is too large, you could end up with a loop at one point on the O-ring which can cause the seal to jump up out of the groove or buckle over when the mating face compresses it. Both actions can and likely will damage the O-ring. Last, when bolting or clamping the mating faces together, make sure to use a star pattern in order to achieve equal compression on all points of the seal. For more information refer to the Parker O-Ring Handbook, Mobile inPHorm or visit us online at https://prker.co/3teazEf #Orings #HowTo #Installation