Matter Pairing Fails? Check This First скачать в хорошем качестве

Matter Pairing Fails? Check This First

Matter and Thread don’t randomly “break”. Most of the time — your IPv6 network isn’t ready. In this video I show you how I configured IPv6 on my UniFi UCG Ultra so Thread devices finally paired correctly and stopped failing during commissioning. We’ll go through Prefix Delegation, ULA, SLAAC, Router Advertisement (RA) and what actually matters for Home Assistant. This is not theory — this is the exact setup that fixed my Thread pairing issues. If your Matter over Thread devices: • Start pairing but fail at the end • Work for a day and disappear • Or randomly show “unavailable” … this might be the missing piece. 🧠 What we cover: • Why Matter depends on IPv6 • What ULA, SLAAC and RA actually mean • UniFi WAN + LAN configuration • Quick debug checklist for Thread issues • Common mistakes that make people think “Thread is unstable” 🔧 My setup: • Home Assistant OS • UniFi UCG Ultra • SLZB-06 Thread Border Router • Matter over Thread + Matter over WiFi devices 00:00 - Thread Pairing Failed (But Why?) 00:53 - What Actually Broke (Not the Device) 01:34 - IPv6 Basics: ULA, SLAAC & Prefix Delegation 02:24 - Why Matter Over Thread Needs IPv6 03:20 - How WAN & LAN Prefix Delegation Works 04:05 - The Silent Failure: Router Advertisement 05:01 - Why Matter Over Wi-Fi Worked 05:52 - Quick Debug Checklist (Step by Step) 06:52 - Z-Wave Long Range vs Thread (No IPv6 Needed) 07:16 - This Isn’t a Protocol War 08:01 - Infrastructure First, Devices Second If this helped you understand why your network behaves the way it does, consider subscribing — we build smart homes properly here. 📁 Code & configs from the video if available: https://github.com/BeardedTinker/vide... Stay awesome & connect smarter, Bearded Tinker 🧡 Support the channel: 👕 Merch: https://shop.beardedtinker.com 🤝 Channel Memberships ☕ Super Thanks are always appreciated (*) indicates affiliated links #homeassistant #thread #matter #zigbee