У нас вы можете посмотреть бесплатно Voodoo Lab Pedal Power 2 Plus vs DC Brick или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
This is a comparison of these two power supplies with various noisy pedals. I tracked the max volume in my sound editor and have the following results: The numbers represent the max volume during the wave recording. These numbers are all negative numbers so the closer to zero they are, the louder (worse) they are. PP2 Brick nothing -53.2 -48 CS3 -35.3 -34.6 CS3+TS9 -25.6 -25.6 +wah -10.1 -15 dyna/bd2 -20 -18.8 dyna/ts9 -23 -22.4 dyna/sd1 -5.7 -6.8 dyna/fz5 -7.2 -5.8 dyna/ds1 -28.8 -30.1 dyna/keeley -13.7 -11.2 +wah -3.6 -5.0 all -2.1 -2.2 In general, they were pretty close. The PP2+ won with most of the settings but the brick won whenever the wah was engaged. No, I would never have this many pedals on at once, I just wanted to see for myself whether there was a clear difference in the sound before picking one. I think the PP2+ wins, but probably not enough to justify the higher price (they tend to go for ~40 more on Ebay). I used the Y splitter cables only because I needed them to power my pedals so I wanted them in on the comparison. One more thing... all the noises are generated using the bridge pickup in single coil mode with the tone at 10 (trying to get as much noise as possible). I did this for my own peace of mind to make sure I was selecting the right unit. If it helps someone else, great.