Quick Build: Vial Holder & Organizer скачать в хорошем качестве

Quick Build: Vial Holder & Organizer

Hey everyone, it’s whynabile here, and for today’s super-quick build, I’m going to be showing you this super-handy and sturdy vial holder made out of a file box and a little bit of cutting. find the tallest vial, and use an awl to transfer the mark use a carpenter’s square or speed square to extend the mark use a sharp box cutter to shorten the box that’s all for the box itself! find a board or strip of cardboard about the width of your shortest vial use the block to transfer properly-spaced lines onto the leftover pieces of cardboard cut out strips of cardboard using a box cutter in my case, I need 12 short strips and 10 long strips next, lay vials out in the box with cardboard strips going one direction only o use this to mark the cardboard strips that will go the other direction use shears or good scissors to cut out notches half-way through the strips at the markings repeat this process for all the strips going one way, and then switch the setup and prepare the notches going the other way. Once you have them all cut, slot them together, and you’re all done! Thanks so much for watching, and if you have any questions or comments, please let me know! Seeya next time!