How to Repair a Leaky Watkins Wavemaster Jet Pump скачать в хорошем качестве

How to Repair a Leaky Watkins Wavemaster Jet Pump

Welcome to Backyardplus! In this video, we show you how to replace the wet end on a model 39578 Watkins Wavemaster jet pump with the 72996 Wet End Kit. Please visit us at backyardplus.com for all your OEM Hot Spring, Tiger River, Limelight, Hot Spot and Solana replacement parts. Use our parts finder serial database to help identify parts that belong to your specific hot tub make, model and year: https://backyardplus.com/parts-finder/ For the best prices and service on all your Hot Spring replacement parts, check out: https://backyardplus.com/ To purchase the 72996 Wet end kit, check out: https://backyardplus.com/parts/72996-... To purchase the 34447-x2-BYP Compression O-rings, check out: https://backyardplus.com/parts/34447-... To purchase the ML-10Z-BYP Silicone Grease, check out: https://backyardplus.com/parts/ml-1oz... 00:00 Beginning 00:14 Tools and parts 00:41 Disconnect power, remove the lid 00:54 Disconnect the pump 01:14 Remove the vent hose 01:25 Loosen the fittings and drain hose 02:04 Loosen the mounting bolts 02:17 Loosen the volute cover screws 02:50 Remove the vent shroud 03:02 Remove the impeller 03:14 Lock the shaft 03:27 Channel locking pliers and hammer 03:59 Remove the impeller nut 04:16 Remove wet end bolts 04:37 Clean the shaft and install slinger 04:54 Remove the plug and install the barbed nipple 05:19 Remove the volute cover, impeller and wear ring 05:41 Install the new wet end 06:10 Install the impeller and shaft seal 06:23 Install the wear ring and grease the O-ring 06:44 Install the volute cover and shroud 07:14 Remove O-rings and install new ones 07:41 Install the jet pump and tighten the fittings 08:01 Heat the 1/4" tubing and connect it to the fitting 08:26 Install the copper bonding wire 08:53 Install the jet pump cord, relief clamp, and connect the jet pump