Скачать с ютуб How to change an inner tube in a Hand Truck / Wheelbarrow tire в хорошем качестве

How to change an inner tube in a Hand Truck / Wheelbarrow tire

Buy a Muletto now at www.themuletto.com This is a short instructional video on how to change the inner tube in the Muletto Multi-Function Garden Cart, but the same procedure applies to standard hand truck or wheelbarrow tires. You will need two blunt objects such as a screwdriver or bicycle tire levers, the new inner tube and a tire pump. First start by fully deflating the old tube by pressing down on the air valve. Then use one of the blunt objects to lift the tire over the rim by inserting the screw driver inside the rim underneath the tire and the prying and lifting the tire over the rim. While holding the first screw driver in place, use the second screw driver or blunt object to pry up the next section of tire, then continue and go around the rim prying up the rest of the tire. Once one side of the tire is completely off the rim, reach in and pull out the old inner tube. Now lay the new tube over the tire and align the valve stem with the hole, begin stuffing the tube into the tire. Once inside the tire, use your fingers to put the tube around the rim and feed the valve stem through the valve hole. Starting from around the valve stem, use your blunt object as a lever to position part of the tire back around the rim. Now lay the tire on a solid surface and using your palms press the tire onto the rim, go slowly and work your way around. Your almost done, using your and pump inflate the tire to 30psi. Put your wheel back on your Muletto.