Скачать с ютуб Installing the Competition Trigger Kit for Ruger Mk IV & 22/45 в хорошем качестве

Installing the Competition Trigger Kit for Ruger Mk IV & 22/45

Apex's Scott Folk walks you through the proper procedure for installing the Apex Competition Trigger Kit for the Ruger Mk IV and Mk IV 22/45 pistols. PLEASE NOTE: This is a very long video and we advise you review it first before starting on the install, Then, use the timecodes to take you to the relevant parts you need to watch or re-watch. There are two options for installing the hammer assembly, one with the Apex Mag Safety Delete and one using the factory Magazine Safety. Pick which you plan to go with before you start the project so you know where to jump to in the video. Recommended Tools: – Roll of Tape (you will be using the tape) – Small Hammer – Needle Nose Pliers – 1/16" Hex/Allen Wrench (one needs to be L-shaped) – Torx T-10 Bit – 3/32" Pin Punch (flat end) – 1/16" Pin Punch – Driver Timecodes 0:00 - Intro 0:58 - Tools Needed 1:49 - Disassembly of Lower Frame 8:04 - Kit Contents 8:30 - Apex vs Factory Parts Comparison 10:24 - Prep Trigger w/ Over-travel Screw 10:52 - Install Trigger, Trigger Bar, Trigger Pivot Pin, Bolt Release & Spring 13:49 - Install Trigger Return Spring & Plunger 14:10 - Install Sear, Sear Pin, and Sear Spring 20:20 - Tension the Sear (need UNLOADED magazine handy) 21:58 - OPTION 1 - Hammer Assembly w/ Apex Mag Safety Delete 23:00 - Install Hammer Assembly, Safety Plate, Thumb Safety Axel 23:12 - Reinstall Trigger Return Spring & Plunger 31:42 - OPTION 2 - Hammer Assembly w/ Factory Magazine Safety 31:49 - Assemble Hammer assembly with the Factory Magazine Safety 33:55 - Orientation of Factory Magazine Safety System 34:27 - Reinstall Trigger Return Spring & Plunger 34:48 - Orientation of Thumb Safety Plate 35:07 - Install Thumb Safety Plate & Thumb Safety 36:27 - Reinstall Hammer Assembly w/ Factory Magazine Safety 41:26 - Install Right Side Thumb Safety 42:12 - Function Check (prior to grips going on) 45:18 - Adjusting Trigger Over-travel Screw 47:38 - Illustrating Proper Sear/Hammer Engagement 49:02 - Install Bolt Release and Grips 49:38 - Final Function Check ———————— SOCIAL LINKS ———————— FULL30: https://www.full30.com/channels/apext... INSTAGRAM:   / apextactical   FACEBOOK:   / apextactical   TWITTER:   / apextactical   GUNSTREAMER: https://gunstreamer.com/@ApexTactical Customer Service Inquiries: [email protected] © Apex Tactical Specialties