У нас вы можете посмотреть бесплатно The Doodlebug Review или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Been using the doodlebug for a while so time to review it! Parts needed to convert the post to SS: Continue reading below parts list for another method not requiring nuts Bottom Nut: M3 x .5 x 9mm long Top Nut: M3 x .5 x 6mm long Internally Threaded Standoff Long Post: M3 x .5 x 50mm long threaded rod Method 1: To do this you would thread the nuts onto the long screw then using a dremel tool cut the top phillips head off the long screw then using the nut that is at the far end thread it off the top to correct the threading after cutting the phillip head off.. Method 2: You could just buy the long post.. Leave the phillip head on it and use 2 ss washers and a spring to do an orion or ac9 style positive post if you can't find the 2 nuts. A link to get the long post is: www.mcmaster.com and do a search for part number 90116A188