У нас вы можете посмотреть бесплатно How to get GPS from Flite Test EZ-ID to Betaflight или скачать в максимальном доступном качестве, которое было загружено на ютуб. Для скачивания выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Here are the exact steps you need to take to get GPS location data from the Flite Test EZ-ID Remote ID broadcast module into Betaflight so you can use the coordinates for return to home, display on your OSD, etc. Step 1: Wiring diagram is incorrect. Connect second pad from left (when looking at the back of the board) to a RX pad on your flight controller. Step 2: Update to Betaflight 4.4.3-zulu ( or anything newer ). Step 3: Enable MSP on the UART you connected the wire to. Step 4: Enable GPS and select MSP. If you have issues getting MSP enabled on the right UART and MSP enabled for GPS at the same time, have a look at this: https://github.com/betaflight/betafli... #remoteID #ezid #ftezid #betaflight