У нас вы можете посмотреть бесплатно Jumper T-Lite: 1W Crossfire mod (powers off when radio is off or when using internal module) или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
I will show you my attempt at modding the Jumper T-Lite to use an external Crossfire Nano module on 1W. The mod is really simple and you only need a resistor and an N channel MOSFET. This mod allows the external module to be turned off when the radio is turned off or when the internal multi protocol module is used. ❗❗❗UPDATE - READ BEFORE MODDING ❗❗❗ It has been brought to my attention, that there are more efficient N channel MOSFET you should use. Instead of the one I used, go with one of the following: ► IRL540N: https://bit.ly/2OttUj0 ► IRLB8743: https://bit.ly/37bi9Ek They both have a lower Drain-Source resistance and are thus more efficient. DISCLAIMER: I do not take responsibility for your actions. If you attempt this mod, you do it at your own risk. There is a chance of breaking the radio or shorting out the battery if you do something wrong. Be aware that 18650 batteries are not a joke and can be dangerous. Also by doing this you will probably use any support from Jumper and I am pretty confident void your warranty. Only do this if you know what you are doing. ►Used MOSFET (RFP12N10L): https://bit.ly/2N1yXqD ►SD-Card content: https://bit.ly/2MUdaRT ►TBS Agent Lite: https://bit.ly/3abQchM 💲 Buy the Jumper T-Lite on Banggood: ►https://www.banggood.com/custlink/GGD... 🤯 Check out my homies: ►Noctaro Quad: https://goo.gl/8XWJUD ►kuhdjaku: https://goo.gl/WrqGop ►Resaikable FPV: https://goo.gl/wA1KY8 Tips: ►Paypal: https://paypal.me/stylesuxx 00:00 Intro 00:47 Needed tools 01:39 Step 1: Improving power wires 02:03 Step 2: Pulldown 02:14 Step 3: Routing the wires 02:44 Step 4: Hooking up the MOSFET 03:19 Step 5: Attaching the new power leads 03:57 Step 6: Putting everything back together 04:20 Powering on the radio with module 04:55 Preparing SD card 05:10 CRSF Setup 05:54 Power on time 06:24 Use quality cells 06:42 But how? 07:50 Outro #Jumper #TLite #FPV