We Built a Paver Patio [Like a PRO] Start to Finish скачать в хорошем качестве

We Built a Paver Patio [Like a PRO] Start to Finish

Take these steps to make sure you build a paver patio that will last. On my barn we have a covered porch that gets used quite a bit. To expand that area for storage and grilling we decided to build a paver patio. To do so we started by digging out the soil about 8 inches below grade. We then compacted 1-2 inches of clear 3/4 inch gravel base to fill any low spots. After covering that with commercial landscape fabric, we compacted another 2-3 inches of that same 3/4" clear gavel for drainage. After getting that leveled and pitched correctly we laid some 3/4 inch steel pipes for guides and added 1 inch of 3/8 inch clear chip stone and screed it even with the pipes. With a good base in place the pavers got installed and edged with paver edging. Finally poly sand was used to fill the joints and lock all the pavers in place. We also added a small privacy fence to hide an AC unit. Pavers: https://unilock.com/product/brussels-... Inside Color: Limestone Soldier Course: Dark Charcoal Polybind Sand: https://polybind.com/jointing-materia... SST EZ-Spike: https://homedepot.sjv.io/KjqQLn SST Connector Screws (Black): https://homedepot.sjv.io/Gm0LJk Pit Boss Grills: https://pitbossgrills.77jaha.net/nL2OY9 0:00 Layout & Excavation 0:52 3/4" Clear Gravel Base 2:00 3/8" Chip Stone Base 3:06 Installing Pavers 3:51 Cutting the Curve 4:30 Paver Edging 4:57 Backfill 5:27 Polymeric Sand 6:30 Privacy Fence 7:20 Outro ------------------------------------------------- SUPPORT ROGUE ENGINEER Buy a shirt: http://bit.ly/rogueSHOP Shop on Amazon: http://bit.ly/rogueAMZN Shop at HomeDepot: http://bit.ly/rogueHD ------------------------------------------------- BE SOCIAL   / rogueengineer     / rogue_engineer     / rogue_engineer