Getting started: How the PIPETBOY GENIUS pipet controller works скачать в хорошем качестве

Getting started: How the PIPETBOY GENIUS pipet controller works

The PIPETBOY GENIUS will revolutionize what you think about serological pipetting. In this video, we’ll talk you through everything you need to know to get the most out of your pipet controller, including how to operate the repeat dispense mode, how the overfill protection works, and how the aliquots are even more precise than what you're seeing on your pipet's graduations. For more information: https://www.integra-biosciences.com/e... How to switch it on If switched off or unused for over 48 hours, the PIPETBOY GENIUS enters battery saving sleep mode. To switch it on, simply press and hold the repeat dispense button for 2 seconds. A few seconds after being put down, the PIPETBOY GENIUS enters standby mode. Picking it up, turning the volume wheel or pressing the repeat dispense button will switch it back on. How to charge it Use the INTEGRA USB-C power cable - sold separately - to charge the PIPETBOY GENIUS. The instrument can be used while charging. How the Steady-Grip feature works The PIPETBOY GENIUS offers a Steady-Grip feature which ensures a solid grip for any volume pipet. How to set the pipetting speed The speed slider sets the maximum speed. Move it to the upper position for fast liquid handling, to the middle position for standard speed and to the lower position for handling fragile cells or layering applications. You can then regulate the speed up to the maximum speed by varying the pressure applied to the aspirate and dispense buttons. How the overfill protection works Using the PIPETBOY GENIUS in combination with INTEGRA serological pipets provides the added benefit of overfill protection. If you don't aspirate air, the overfill protection will stop your aspiration slightly above the 0 line, or the nominal volume of the pipet. To override the overfill protection, simply press the aspiration button again to aspirate more. How to repeat dispense Combining the PIPETBOY GENIUS with INTEGRA serological pipets allows you to repeat dispense. The volume wheel sets the volume of your dispense aliquot, anywhere between 0.1 to 50 ml. After setting your dispense volume, choose the speed using the slider. This is the set speed for the dispense, and can be changed between dispenses. All you need to do now is aspirate as much as you wish, and simply press the repeat dispense button for each dispense. How to store the PIPETBOY GENIUS The PIPETBOY GENIUS can be stored in many ways. Firstly, every instrument comes with a wall mount which can be installed using the strong adhesive on any clean, vertical surface. The PIPETBOY GENIUS also has built-in ledges on the sides, allowing it to be placed it on the bench with an empty pipet inserted without touching any surfaces. The instrument can also be placed on the bench upside down with a clean pipet inserted to save space. It's even possible to lay the PIPETBOY GENIUS on its back with an empty pipet. How to access the settings menu Press the volume wheel in the middle position to access the settings menu. Use the wheel to navigate through the settings and press it to select an option. Video content [00:00] – Introduction [00:38] – Switching it on [01:12] – Charging it [01:22] – Steady-Grip feature [02:32] – Pipetting speed [03:05] – Overfill protection [03:58] – Repeat dispense [06:17] – Storage options [07:07] – Settings menu [07:40] – Outro