How to Replace a Toro Zero-Turn Riding Mower Blade Belt скачать в хорошем качестве

How to Replace a Toro Zero-Turn Riding Mower Blade Belt

This video from Sears PartsDirect shows how to replace a worn out blade belt in some Toro zero-turn riding mowers. A worn or broken belt won’t spin the mower blades correctly. Replace a damaged blade belt by following the steps in this video. Visit us at https://www.searspartsdirect.com?sid=... Or call 1-800-437-1673 to speak with a parts specialist. The video includes these parts. Look up your model to make sure you get the right parts for your mower. Blade belt https://www.searspartsdirect.com/part... Find parts for your mower at: https://www.searspartsdirect.com/part... Or click here to schedule an appointment with a repair technician. https://www.searshomeservices.com/rep... Transcript: The blade belt connects the engine pulley to deck pulleys that spin the cutting blades. A worn or broken belt won’t spin the mower blades properly. Replace a damaged blade belt by following the steps in this video. Before you begin, wear work gloves to protect your hands. Disconnect the spark plug wires and make sure the parking brake is set. Lower the mower deck to the lowest cutting position. Remove the mounting screw that secures the floorboard to the frame. Lift off the floorboard. Remove the mounting bolts from the pulley covers and remove both pulley covers. Loosen the belt guide nut on the top of the idler pulley so you have enough space to remove the blade belt. Push in the idler arm to release tension on the blade belt and roll the belt off the left pulley. Release the belt from the other blade pulleys. Release the blade belt from the electric clutch pulley and remove the blade belt. Wrap the blade belt around the electric clutch pulley on the engine crankshaft. Push the blade belt forward and up onto the deck. Place the belt around the spring-loaded idler arm pulley. Move the belt guide to its original position and tighten the mounting nut on the belt guide. Route the belt over the center and right-side deck pulleys. Follow the diagram posted on your deck. Push on the idler arm to release belt tension and wrap the belt around the left deck pulley. Reinstall the pulley covers and tighten the mounting bolts. Reinstall the floorboard and secure it with the mounting bolt. Reconnect both spark plug wires.