1st Gen Tales Pt 2 - 4x4 Dodge Cummins - Oil Pan Removal - It CAN be Done with Engine Installed скачать в хорошем качестве

1st Gen Tales Pt 2 - 4x4 Dodge Cummins - Oil Pan Removal - It CAN be Done with Engine Installed

Having read on forums that the oil pan in a Dodge 1st Gen Cummins could be removed by simply lifting the engine a few inches, I set out to do just that, and succeeded. This video will walk you through all of the steps. 1st Gen Dodge Front Grille Removal -    • 1St Gen Dodge Ram Pickup Front Grill Remov...   1st Gen Dodge Cummins - Troubleshooting Complete Oil Pressure Loss -    • 1st Gen Tales Pt 1 - Dodge Cummins - Troub...   TABLE OF CONTENTS 00:00 – 04:00 Intro and background info 04:01 – 04:12 Disconnect the battery 04:13 – 04:33 Drain engine oil 04:34 – 07:02 Drain coolant and disconnect lower radiator hose 07:03 – 07:19 Remove air line between filter and turbo 07:20 – 08:25 Remove upper radiator hose 08:26 – 09:20 Remove oil filler neck (may not be necessary) 09:21 – 10:32 Release tension on serpentine belt 10:33 – 10:42 Unplug CPS (Crank Position Sensor) 10:43 – 14:23 Remove fan assembly and shroud 14:24 – 14:54 Remove decorative valve cover… cover 14:55 – 16:19 Remove air line between turbo and intercooler 16:20 – 17:13 Remove air line between intercooler and intake 17:14 – 19:29 Remove engine mount nuts 19:30 – 20:04 Raise front end and install jack stands 20:05 – 20:20 Chock rear tires & apply e-brake 20:21 – 20:58 Remove #6 valve cover 20:59 – 21:18 Remove front grille if desired 21:19 – 21:35 Install engine hoist 21:36 – 23:17 Lift engine and monitor via measurements 23:18 – 24:55 Remove oil pan bolts 24:56 – 27:05 Remove oil pickup bolts 27:06 – 27:24 Remove oil pan 27:25 – 28:27 Revisit oil pickup bolt locations after pan removed 28:28 – 30:00 Wrapping up