How to Replace Intake Manifold 2011-2019 Ford Fiesta скачать в хорошем качестве

How to Replace Intake Manifold 2011-2019 Ford Fiesta

Buy Now! New Intake Manifold from 1AAuto.com https://trq.video/ia-1AEIM00069 This video shows you how to install an intake manifold on your 2011-2019 Ford Fiesta. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is added to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced. This repair was done on a 2012 Ford Fiesta S 1.6L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles: 2011 Ford Fiesta 2012 Ford Fiesta 2013 Ford Fiesta 2014 Ford Fiesta 2015 Ford Fiesta 2016 Ford Fiesta 2017 Ford Fiesta 2018 Ford Fiesta 2019 Ford Fiesta Tools you will need: • Flat Blade Screwdriver https://trq.video/oBL-1AXAA00013 • 10mm Flare Wrench • 10mm Socket https://trq.video/oxm-1AXAA00017 • 15mm Socket https://trq.video/oBE-1AXAA00015 • 18mm Socket • 8mm Socket https://trq.video/oxm-1AXAA00017 • Stretch Belt Tool https://trq.video/oa-1AXAA00114 • Hose Pliers • Needle nose pliers https://trq.video/oeH-1AXAA00051 • Needle nose pliers https://trq.video/oeH-1AXAA00052 • Pliers • E8 Inverted Torx Socket • T25 Torx Driver • T27 Torx Driver • T30 Bit • 1/2 Inch Ratchet • 1/4 Inch Ratchet https://trq.video/oxm-1AXAA00017 • 3/8 Inch Drive Ratchet https://trq.video/oBE-1AXAA00015 • Swivel • Drill • Gloves https://trq.video/odS-1AXSS00048 • Safety Glasses • Pick https://trq.video/ofV-1AXAA00037 Subscribe:    / @trq   Check out our playlist: Ford Fiesta 2011-2019 6th Generation:    • Ford Fiesta 2011-2019 6th Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.