How to clean N99 face masks/ Wash sports mask with exhalation valves and filter/ mask valve fix скачать в хорошем качестве

How to clean N99 face masks/ Wash sports mask with exhalation valves and filter/ mask valve fix

We've been getting a lot of questions lately on how to wash sport mask or dust musk so we explain how we recommend washing your BASE CAMP masks and how to wash any dust masks or respirator with filters and valves. Firstly, Removing the valves from the mask by twisting in the open direction which is counter-clockwise, remove the valve caps and the valve bases from mask.Then repeat this step for the second valve. So one thing to know is you are really going to pay attention to this little silicone diaphragm. Making sure that the little diaphragm doesn't get lost somewhere. Now put the filter that you removed right into a sealed bag and keep it separate from everything. And put the outer shell of mask and valves into the water. We wash outer shell of mask firstly.Hand wash it with lukewarm water and a mild soap solution. Do not use solvents such as thinner or the like. Getting in all those nooks and crannies to make sure it's really clean.Go ahead and wash again now pretty thoroughly, making sure to rinse off that nose piece again. And then wash all parts of the valves. Let's go lay out the outer shell of mask and valves on a clean surface, so it can air out and dry. So just keep in mind when you go to use your mask again after it's dry. You're gonna adjust that nose piece so it fits your face again right.Waiting for them to dry up completely. Now, Show you how to put everything back together. It's time to install our filter. First step is to stick both of the bases of valves through the filter.The second step is to slide the filter into the mask lining up the holes. Grab and put the diaphragm back to the valve. Through this process you're going to make sure that the diaphragm stays in place. You'll notice two grooves on the base of the valve and two grooves on the cap these need to be lined up. Push down and turn clockwise. Repeat this process for the second valve line up the grooves push together. Return to the closed position. Now your mask is ready to be worn.Please note that the opening of the caps should be down to avoid fogging of the glasses.Always check your mask before use. If any damage it detected, do not use. BC Mask Facebook :   / bcmask.product   BC Mask website: https://bcmask.com/products/base-camp...