Chet Lanzo's 1933 Cabin oldtime rubber RC - building скачать в хорошем качестве

Chet Lanzo's 1933 Cabin oldtime rubber RC - building

A 30" 1933 Cabin design from Chet Lanzo; built from the short kit by Bob Holman. I've been building it slowly over the last 5 months, just got out today for some test flights, included at the end. Added a little nose weight to adjust the glide, next a little more right thrust, and then it 'flew right off the board'! Got up to over 700 winds on the 4th flight, 163 feet altitude, 1 min 43 sec flight time, can't wait to get up to 950 winds; but the motor broke on launch on next flight so that was it for today. Update: I was able to remove the nose weight so now there is no extra balancing weight on the plane. I reduced the positive wing incidence slightly. Climb is incredible. Here's a video of a beautiful flight:    • Chet Lanzo's 1933 Cabin rubber RC - trimme...   And another one:    • Chet Lanzo's 1933 Cabin - more humid flyin...   Topics: 4:00 - balsa props. Note: I meant to say that the Lanzo prop has about a 1.1 P/D ratio, the Korda has a 1.3 P/D ratio 7:22 - fuselage jig from Retro-RC 11:09 - leveling the nose plug 12:02 - notes on bobbins and freewheel designs: Garami-type freewheel, Superior freewheel clutch, my tension stop freewheel version 15:06 - finished model, color is Bougainvillea A building thread is here: http://www.hippocketaeronautics.com/h... Short kit and plan: http://www.bhplans.com/ Outerzone free plan: http://www.outerzone.co.uk/ Prop blanks and freewheel clutch: http://volareproducts.com/BUY/ Fuselage jig: http://retrorc.us.com/ Polyspan lite: http://www.freeflightsupplies.co.uk/