Drilling procedure for XGate Dental X11 and X3 Pure&Porous Implant 3.3 mm diameter bone type D1 скачать в хорошем качестве

Drilling procedure for XGate Dental X11 and X3 Pure&Porous Implant 3.3 mm diameter bone type D1

🦷 XGate Dental Drilling Protocol https://xgate.dental/wp-content/uploa... 🦷 IMPORTANT! Before installing X-Gate Dental implants, familiarize yourself with the protocol for preparing the implant siteЖ https://bit.ly/3U6uqBb. The video shows the sequence of operations for installing a 3.3 mm diameter implant in dense D1 bone. 00:00 First, a hole should be made in the hardest cortical layer of the bone to a depth of 1-2 mm using a special cortical bone drill. 00:30 Next, use a 2 mm diameter pilot drill to make the hole to full depth, typically up to 10 mm. The recommended rotational speed is 1000 rpm, maximum 1200 rpm. Drilling should be done with moderate pressure to avoid feeling resistance from the bone. Intensive irrigation is necessary to cool the drill and surrounding bone. 00:34 Next, use a 2.5 mm diameter drill to go halfway into the future implant site. 00:40 A 2.8 mm diameter drill can be used to go a quarter of the way into the site. Then, use a 3.2 mm drill to expand the opening of the site to the depth of the cortical bone layer, typically 2-2.2 mm. If there is resistance from the bone during drilling, it may be necessary to replace the drill as the one being used may have become dull. 00:50 Under no circumstances should drilling be done without water, as this can overheat the bone and lead to thermal necrosis of the bone tissue after implant installation. 01:10 Insert the implant into the prepared site. The aggressive thread profile of X-Gate Dental implants allows it to be screwed directly into the bone tissue, providing good primary stability. The maximum allowable torque when installing the implant is 50 N*cm. Carefully follow the instructions provided. Visit the company website: https://bit.ly/3U6uqBb. #implantdrillingprocedure #dentalimplants #dentalimplantsurgery #dentalprotocol . ‼️ Disclaimer: Any medical or scientific information provided in connection with the content presented here makes no claim to completeness and the topicality, accuracy and balance of such information provided is not guaranteed. The information provided by XGate Dental Ltd. does not constitute medical advice or recommendation and is in no way a substitute for professional advice from a physician, dentist or other healthcare professional and must not be used as a basis for diagnosis or for selecting, starting, changing or stopping medical treatment. Physicians, dentists and other healthcare professionals are solely responsible for the individual medical assessment of each case and for their medical decisions, selection and application of diagnostic methods, medical protocols, treatments and products. XGate Dental Ltd. does not accept any liability for any inconvenience or damage resulting from the use of the content and information presented here. Products or treatments shown may not be available in all countries and different information may apply in different countries. For country-specific information please refer to our customer service or a distributor or partner of XGate Dental Ltd. in your region.