Complete disassembly of the old PHOEBUS 725 square can DIY maintenance Part 2 Assembly ,adjustment скачать в хорошем качестве

Complete disassembly of the old PHOEBUS 725 square can DIY maintenance Part 2 Assembly ,adjustment

Following on from the previous disassembly and cleaning, this is an assembly and adjustment video for the early model PHOEBUS725, an Austrian-made camping gas stove with a square canister. For the gasket connecting the gas tank and head, I used a copper washer from an engine drain, which I purchased at a motorcycle parts store because it's inexpensive and easy to find. For the spindle gasket, I used versatile sheet graphite. I made the wig inside the tank myself using cotton thread purchased at a 100-yen shop. The windshield, which had developed white rust, was removed and prevented with Hanasaka G. As for the cause of the fuel inlet fire, it turned out that the commercially available replacement gasket for the PHOEBUS purchased previously was thin and wore out after a short time. I made a new one out of thick rubber sheet. The burner plate, which had a lot of rattle, was attached using a cheap spot welder purchased on AliExpress.