У нас вы можете посмотреть бесплатно How to Replace the Bearing on Flygt 3085, 3102 & 3127 Pumps или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
This is an informational video on how to replace the bearing on Flygt 3085, 3102 and 3127 pumps. This video is intended as a general reference for technical personnel tasked with maintaining pump performance and ensuring the replacement process is done safely and effectively. This video is NOT intended to serve as a step-by-step, fail-safe checklist. Projects vary and may require additional steps provided for in the Manual not included in this video. The video demonstrates how to remove the rotor in the pump, use the bearing puller tool to pull off the bearing holder, and remove the actual bearing, as well as how to assemble the new bearing. To learn more about the 3085, 3102 and 3127 pumps: https://www.xylem.com/en-us/brands/fl... https://www.xylem.com/en-us/brands/fl... https://www.xylem.com/en-us/brands/fl... Contact us here: https://www.xylem.com/en-us/brands/fl... Subscribe to our channel for more insights on how our innovative solutions are transforming water and wastewater management. Disclaimer Warning: Carefully review the product specific Installation, Operation and Maintenance manual (“Manual”) before tampering with the product in any way. All user safety rules and instructions contained in the Manual, as well as any other applicable safety rules, must be observed. This video is provided as general reference only, as a complement to the Manual, and cannot be relied upon as a substitute for professional advice. Failure to follow all instructions in the Manual may void the manufacturer's warranty. If there is a question or any uncertainty regarding the intended use or maintenance of the equipment, contact a Xylem representative before proceeding. Xylem cannot be held responsible for any actions or inactions undertaken as a result hereof. 00:00-00:10 Introduction 00:10-00:34 Undo Three Socket Hexagon Screws 00:34-00:44 Lift off the Rotor Unit Together with the Bearing Holder 00:44-01:04 Remove the Bearing Cover 01:04-01:24 Fit the Bearing Puller Tool 01:24-01:44 Pull off the Bearing Holder 01:44-02:00 Remove the Bearing Puller 02:00-02:22 Knock out Main Bearing 02:22-02:48 Pull off the Support Bearing with a Bearing Puller 02:48-03:00 Lubricate the Shaft 03:00-03:27 Hammer Down the Support Bearing 03:27-03:39 Oil and Fit Main Bearing 03:39-04:00 Hammer Down the Main Bearing 04:00-04:27 Install Bearing Holder and Bearing Puller on the Shaft 04:27- 05:02 Press the Bearing Holder onto the Shaft 05:02-05:20 Grease O-ring and Fit the Bearing Cover 05:20-05:39 Tighten Screws 05:39-06:08 Install the Bearing Holder #Flygt #ServiceVideos