88 Nissan Pickup Truck D21 - Blower Motor Replacement Removal скачать в хорошем качестве

88 Nissan Pickup Truck D21 - Blower Motor Replacement Removal

Concern "The A/C in my truck does not work, I don't feel air from the vents anymore" -Air blowing out of the vents and the A/C is not blowing cold are two different concerns. -If there is 12v present at the component connector and the component does not power on when activated, the issues is most likely the component itself. -Tapping or disturbing a motor/pump can sometime cause it to free up and work again temporarily. When crimping blower motor connector Connect the 12v supply wire (in this vehicle it was the Solid Blue Wire), to the Red blower motor wire. Connect the ground wire (in this vehicle it was the Blue/white Wire) to the Black blower motor wire. Next Repair on Project Pickup Series Concern "The air only comes out of vents when using the 1, 2, and 3 speeds. No air from the vents when using the number 4 speed setting" -Comment below to guess the fix- Tips: Make sure your Digital Multi Meter and Leads are reading correctly. The 12v Battery is an easy place to check that the meter is reading battery voltage. Turn off switch/ignition when unplugging and plugging in electrical connectors. Be cautious of what is behind the cables when using a Heat Gun, for heat shrink. A piece of carboard can protect the backing so the carpet does not get damaged.