Telos Pro [Slimline] - LED Driver Replacement / Upgrade скачать в хорошем качестве

Telos Pro [Slimline] - LED Driver Replacement / Upgrade

An in-house video demonstraing step-by-step instructions on how to replace or upgrade your Telos LED driver. Steps 1. Make sure you have the correct driver and tooling. The driver should be Telos approved and the required tools are 3 & 4mm hex screwdrivers. 2. Start by removing 4 x 3mm hex bolts holding the driver to the driver mounting bracket. 3. Loosen 2 x 4mm hex bolts on the bracket that is nearest the driver. Then slide the bracket over the black connector. 4. Twist the lock ring to the unlocked position and disconnect the electrical connector. Place the old driver to one side. 5. Connect the new driver, you will hear a ‘click’ and the lock ring will show in the locked position. Slide the bracket back to its original position. 6. Place the new driver into position and reinstall the 4 x 3mm mounting bolts. 7. Finally, tighten down the 2 x 4mm bracket securing bolts and check everything is secure by gently trying to move the driver. The replacement is now complete! https://www.teloslighting.co.uk/drive... #poweredbytelos