Knomi v2 vs Eddy Coil compatibility issues скачать в хорошем качестве

Knomi v2 vs Eddy Coil compatibility issues

I have a very rare compatibility problem! Most likely, no one will help me solve it, but I will write this! My equipment: Voron 2.4 board Manta-M8P v2 + CB1, head Stealthburner with EBB 2240, Eddy Coil , Knomi v2 Eddy coil is connected to the i2c port on the MP8 v2 board Knomi v2 is connected as usual via wi-fi Eddy coil is configured, works fine, scans and levels the table! """The essence of the problem: i turn on the 3d printer, while the Klipper is loading, the Knomi v2 loses wi-fi, as soon as i turn off the power of the Eddy coil, the Knomi v2 starts working as it should!""" I have already tried everything! I changed the Knomi v2 wifi antenna, connected separate 5v. tried different firmware Knomi v2. I did a bunch of experiments! As soon as the Knomi v2 is inside the 3D printer, the Wi-Fi connection is immediately lost! I suspect that the problem is in the large magnetic field!!! it is also interesting that the CB1 board has no problems with wi-fi! the CB1 board is under the table, maybe that's why! """Sometimes an error appears MCU shutdown: i2c timeout !!!""" *************************************************************************** !!!*Solution to the problem link below*!!! https://klipper.discourse.group/t/knomi-v2...