У нас вы можете посмотреть бесплатно Adding non-Märklin 3-rail Locomotive to the Mobile Station 2 as DCC (MS2 Episode 4) или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
This video illustrates how to configure non-Märklin locomotives on the Märklin Mobile Station 2 (MS2) using DCC. This tutorial will show how to find the information needed in the locomotive/decoder manuals, how to experiment (address change & reset) and how to finalize the locomotive with all functions in the Mobile Station 2. The Roco 79987 locomotive is used as an example. The tutorial illustrates how to change locomotive name, symbol, address. Finally, it is shown how to reset a DCC locomotive. WARNING: Please be aware that there is a difference between tracks by Märklin and other vendors. Märklin is a 3-rail system and requires an extra slider underneath and other wiring inside. Standard DCC is 2-rail and the locomotives will not work on the Märklin tracks. The video shows how to use DCC to configure a Roco DCC 3-rail locomotive that is built for 3-rail. The tutorial covers Mobile Station with software version 3.112. Newer versions should work the same, but some older may not. If you have an older software version consider upgrading your Mobile Station 2 to the latest version. WARNING: Changing these settings may make your locomotive inoperable if you are not careful. However, you can reset the locomotive to factory settings. Be aware that reset might not work as intended on early or non-factory delivered decoders. Tips & How to included: Tip: Use DCC to access all extended functions on the MS2 Tip: What information to look for in the locomotive/decoder manuals? Tip: Most locomotives comes with 3 as the default address. Tip: Only one locomotive on the track while experimenting/programming How to add DCC locomotive manually How to find DCC locomotive Tip: put 8 in CV 8 to reset a DCC decoder. Tip: F0 is usually light How to change DCC address How to reset DCC locomotive How to change name Tip: Use "keyboard" to enter name quickly How to change symbol Tip: Use the SHIFT+knob to select settings faster How to add functions (F1-F28) incl. continuous vs temporary and timed. How to add function F8 and above? How to add Roco 79987 to the MS2 How to add a modern Roco locomotive/decoder to the MS2 Interesting links (English): Märklin Mobile Station 2: https://www.maerklin.de/en/products/d... Enjoy and have fun with model trains :-) Chapters 00:00 Software Version 00:34 Intro 02:40 What to look for in the manuals? 10:58 Experimentation Tips 13:02 Add DCC locomotive manually 14:42 "Find" DCC locomotive 18:43 Change address 21:08 Reset / Tip: remove'n'add loco 24:17 Experimentation summary 25:12 Change name 26:47 Change symbol 27:08 Change the functions (F1-F28) 28:20 Add continuous function (engine sound) 30:25 Add temporary & timed function 32:57 Add another continuous function (shunting mode) 34:43 Add function F8-F28 36:08 Function summary 36:48 Closing remarks