How To Fix TBS Crossfire Binding Issues (via Emergency Update Procedure) скачать в хорошем качестве

How To Fix TBS Crossfire Binding Issues (via Emergency Update Procedure)

In this video I am going to show you how to fix a common binding issue with your Team Blacksheep (TBS) Crossfire to your receivers via emergency update - applies when you see a rapid flashing green light. Emergency update may fix other issues with the receiver. This applies and works for the following receivers with stored golden firmware version on v2.24 (mid 2018) with no additional hardware needed: -Micro Receiver V1/V2 -Nano Rx -Diversity Nano Rx This does not apply to the full/standard diversity receiver as that has a micro USB port where it can be fixed with TBS Agent X. The Procedure: 1. Put Crossfire Tx in bind mode 2. Hold the bind button and power up the receiver 3. Release the button after 2 seconds (you will see green led flash rapidly) 4. Push and hold the bind button again (the green led will flash in a slow double pattern) 5. Release the bind button when green led flashes rapidly 6. The receiver led will turn momentarily red and then you will be prompted on the Crossfire transmitter (or radio screen) to update receiver 7. Power cycle everything 8. Configure your receiver outputs (CRSF, SBUS, etc.) 9. Send it!! Not mentioned in the video, please update the Tx to the latest firmware and or reflash it as some users have reported it helps with resolving binding issues. For additional support and help, please contact TBS support or join their lounge group:   / blacksheeplounge   Any questions or comments, please post them below. Thanks for watching!