smallest black engine oil distillation plant without clay скачать в хорошем качестве

smallest black engine oil distillation plant without clay

waste oil into base oil distillation machine this used oil regenerate equipment recycle black used lubricant oil to be usable oil.(no acid, no pollution) this vacuum distillation used oil recycling equipment use chemical treatment and vacuum distillation technology distill black waste lubricant oil to be diesel/gasoline oil(4%-8%), light base oil(38%-42%), heavy base oil(37%-43%) in different tank, we use the recycled oil again, the residue which not been distilled can be used as fuel. Advantage of vacuum distillation used oil regenerate system 1) Low cost, cost is 30$ for additives to refine one tons used engine oil 2) Easy to operate,low operation cost, only 2 workers can control the machine. 3) The machine can recycle gasoline motor oil, diesel motor oil, all kinds of engine oil, and other lubricant oil to clean oil. 4) Environmental friendly. This machine is full-enclosed, there is no any harmful smell come out form the machine, colloid, oxid, acid, pitch will be converted to oil sludge, can be use as bitumen and fuel. 5) the recycle rate is more than 85%. This includes 4-8% diesel and gasoline mixture, 38-42% light base oil and 37-43% heavy base oil and 6-10% residues. 6) Efficient vacuum systems 7) High quality refined oil, no any discoloration caused by oxidation, no any bad smelling. Working Principle of DIR vacuum distillation used oil regenerate equipment A proposal for processing waste lube oil and industrial oils, using high vacuum distillation technology is presented here. The various steps involved in the projects are given below. Step1: The waste oil is send to heat blender tank, pump the catalyst from catalyst tank to heat blender tank, there have physicochemical action between the waste oil and catalyst. Step2: pump the all the oil and catalyst into distillation kettle, all the oil and catalyst circulate in heat exchanger and distillation kettle, oil been heated. This waste oil is approx 100 degree at 0.098Mpa, have water and some light fractions separated, and collected in water tank. Step3: The temperature is keep rising up to 150-210degree at 500Pa , the lighter fractions such as gasoline, diesel are distilled and cooled and then stored in diesel receiving tank.　　　　　Step4: The undistilled waste oil subjected to high vacuum, medium temperature in the heated distillation plant, the light base oil fraction is distilled and cooled and then collected in the light base oil tank( above 220degree and at a pressure of 300Pa).　　　Step 5: The undistilled waste oil subjected to high vacuum, high temperature in distillation plant, the heavy base oil fraction is distilled and cooled and then collected in the base oil tank ( above 250degree and at a pressure of 100Pa). Step6: The distilled oils are clean oil generally no need further treatment, they are going to be blended with additives to get finished oils for the automotive and industrial applications.　　　　Step7: The final residue is semi solid at ambient and can be processed for manufacturing asphalt, finished to make off-speck heavy fuel oil or to make greases for slow moving machineries. contact :Anne Wu skype:wu.jianglan whatsapp:+8615215080377 email:cqoilreycling@outlook.com