How to change oil on Waspper W3100VA | Petrol driven high pressure washer Waspper with Peggas engine скачать в хорошем качестве

How to change oil on Waspper W3100VA | Petrol driven high pressure washer Waspper with Peggas engine

Check out how to change oil on pressure washer Waspper W3100VA. Find us at - https://waspper.com/​​​​ Buy Waspper W3100VA - https://waspper.com/produkt/waspper-w... More pressure washers at - https://waspper.com/households-2/ Explore assortment of accessories at -https://waspper.com/product-category/... Find more products at - https://waspper.com/​​​ Contact us at - https://waspper.com/contact/ It is recommended to change the engine oil after use of this equipment (according to the Maintenance Schedule). Switch the engine off. Let the device cool down for a while, so its temperature drops below 50°C. This will prevent potential burns. The engine should remain warm still. Warm oil drains from the engine more easily. Unscrew the OIL PLUG WITH GAUGE. Place a container with the minimum capacity of 1 litre below the drain plug. Loosen the drain plug carefully. Let the oil drain smoothly into the prepared container. Once the oil stopped draining, tip the engine to the side slightly to let the remaining oil out too. Clean the surroundings of the drain plug and re-tighten the drain plug in its place again. Used engine oil needs to be deposited at one of the authorised collection points. Engine oil is hazardous waste!