How To Program A Lincoln MKX Smart Key Remote Fob 2011 - 2015 скачать в хорошем качестве

How To Program A Lincoln MKX Smart Key Remote Fob 2011 - 2015

An easy to follow video on how to program a smart key remote fob to a 2011 - 2015 Lincoln MKX. Find a Locksmith in your area with https://www.LocateALocksmith.com More free programming instructions available at https://www.ProgramYourRemote.com Ensure that your MKX is off before beginning this procedure. Ensure that all doors are closed before beginning this procedure and that all doors remain closed throughout the procedure. Perform this procedure exactly as described below, and perform all steps within 30 seconds of starting the sequence. If any steps are performed out of sequence, stop and wait for at least one minute before starting again. Please read and understand the entire procedure before you begin. 1. Place the new unprogrammed smart key in the pocket inside of the center console. 2. Press the driver or passenger power door unlock control three times. 3. Press and release the brake pedal one time. 4. Press the driver or passenger power door lock control three times. 5. Press and release the brake pedal one time. The indicator on the Start/Stop button should begin to rapidly flash, indicating that programming mode has been entered and two programmed smart keys have been detected in the vehicle. 6. Within one minute, press the start/stop button. *If four Intelligent Access Keys have already been programmed to your vehicle, the message MAX # OF FOBS LEARNED will be displayed on the message center. * 7. Remove the smart key from the center console pocket and press the UNLOCK or Lock control on the newly programmed smart key to exit programming mode. 8. Verify that the remote entry functions operate (lock, unlock) and that the vehicle starts with new smart key. If the smart key has been successfully programmed, it can be used to activate the smart key with push button Start feature and can be used to start your vehicle.