Tavor X95 Full Monty disassembly & field stripping for cleaning. Warning. IWI IDF Bullpup скачать в хорошем качестве

Tavor X95 Full Monty disassembly & field stripping for cleaning. Warning. IWI IDF Bullpup

Warning: I've been reading the forums, increasingly owners are forgetting to remove the charging handle prior to removing the barrel to which they will damage the charging handle rod and the gas tube. Replacement parts for these aren't easy to find, especially in Canada. The Trigger and Bolt disassembly are separated from the Full Monty Disassembly and was done at a later date, see end of screen. If you need further help with disassembly and reassembly then check out X95 Micro MSW 13" Full Monty below. X95 Micro 13" Full Monty disassembly.    • Tavor X95 Micro Surplus MSW. Full Mon...   X95 Micro surplus review.    • X95 Micro Surplus MSW. Review. IWI Ta...   X95 18.5" Bolt (Type B) and FCG disassembly.    • Tavor X95 Type B Bolt & Trigger Full ...   X95 18.5" vs. Tar21.    • X95 vs Tar-21. Review. IWI Tavor bull...   On a scale of difficulty in doing the Full Monty. If GSG-16 is a 10 then I rate this a 7.5. This gun isn't perfect. My biggest beef is the gas system, it has no regulator and the gas tubes are not easy to clean also there are no access to the port from the bore to the gas tube. I've concern about the ejector green rubber bubble failing, I prefer they replace it with a metal spring. Finally, design a better barrel locking lug that doesn't slip out of position. When cleaning, manufacturer recommend using the cleaning rod from the chamber to the muzzle. Disclaimer: this video is for educational purposes only, free of charge. Any part you copied is at your own risk and should be inspected by a professional prior to use. Due to Youtube's policy. Please do NOT ask for link or post information of where to buy. Please do not attempt to do my disassembly because it's not made for novices who can't figure out what I'm doing on or off camera also quite often due to the length I don't reassemble or include the FCG which is done separately. If you like what I do on Youtube and you found some parts useful then please support my channel by pressing the LIKE and the subscribing buttons. If it was of no use to you then thanks for watching and please press next. Making videos are time consuming and not to mention expensive to do... Thank you.