What Is a 24-2 Visual Field Test скачать в хорошем качестве

What Is a 24-2 Visual Field Test

This audio article is from VisualFieldTest.com (https://visualfieldtest.com) . Read the full article here: https://visualfieldtest.com/en/what-i... Test your visual field online: https://visualfieldtest.com Support the show so new episodes keep coming: https://www.buzzsprout.com/2563091/su... Excerpt: What Is the 24-2 Visual Field Test?Visual field testing is a key way to measure what you can see in your peripheral (side) vision as well as centrally. The 24-2 test is a specific type of automated visual field exam used in glaucoma care. In simple terms, during a 24-2 test you will sit at a machine (often a Humphrey Field Analyzer) and look straight ahead at a fixed target. Small lights (called stimuli) will flash at various spots in your field of vision. You press a button every time you see a light. The machine records which points you see and which you miss. This builds a map of your visual field, showing areas of normal vision and any blind spots or sensitivities you may have. Because glaucoma damages specific nerve fiber layers in the retina, the 24-2 pattern is designed to catch the most common glaucoma defects (like curved “arcuate” blind spots, paracentral loss, and nasal steps) efficiently across your central 24 degrees of vision () (). It is the single most widely used standard field test in glaucoma evaluation worldwide.The Meaning of “24-2” The name “24-2” comes from the visual field area and pattern spacing it covers. The “24” means the test covers the central 24 degrees of your vision in all directions (roughly a 24° radius from the point you stare at). This includes your central vision and some surrounding peripheral vision, but it stops short of the far edges. The “–2” is a technical detail from the naming convention: it basically means that no test points lie exactly on the vertical or horizontal axes – points are offset by 2 degrees from those lines. The practical takeaway is that the test focuses on a central square region (±24°) around where you fixate, with test points in a grid pattern at 6° intervals () (). In practice, you don’t need to worry about the exact meaning of “–2” – just know that 24-2 is a standard pattern and your doctor will always compare like-to-like when tracking changes.How the 24-2 Grid Is DesignedThe 24-2 test uses a grid of 54 test points spread across your central vision. These points are arranged roughly 6 degrees apart (imagine an 8-by-7 grid) (). Figure out that spacing: if you connect four nearby points in a square, there’s about a 3° gap (radius) in the center where the machine does not test. This design was chosen as a compromise between coverage and speed: more points would catch more detail but make the test much longer and more tiring. By keeping the points 6° apart, a 24-2 test typically finishes in about 5 minutes or less per eye on SITA Standard mode (), which is manageable for most patients (even older adults). Importantly, the pattern is tailored for glaucoma. It retains a couple of extra points on the nasal (inner) side of vision specifically to detect the classic “nasal step” defect of glaucoma (). It also covers both the upper and lower arcs of vision coming out of the blind spot, where glaucoma often causes arcuate (arc-shaped) scotomas. In other words, the 24-2 grid probes the areas of retina that send signals to the optic nerve in a way that tends to be damaged first by glaucoma. In fact, large studies have shown that when glaucoma does progress, it most often harms the nasal and paracentral regions of the 24-2 field (). By covering those zones plus the surrounding retina, the 24-2 test maximizes the chance of catching typical Support the show (https://www.buzzsprout.com/2563091/su...)