2024 Chevy Traverse SUV Front and Rear Dash Cam Install Tips скачать в хорошем качестве

2024 Chevy Traverse SUV Front and Rear Dash Cam Install Tips

Post-installation walkthrough and tips for installing the Viofo A229 Pro 4K Dual dash cam kit using the Viofo HK4 Hardwire kit in a 2024 Chevy Traverse. The rear camera required a longer 8-meter cable which can be ordered directly from Viofo. The end of the video has photos of the fuse panel with fuse taps installed, as well as a photo showing where the USB cable was run in the passenger footwell from the fuse box to passenger door weather stripping. Use fuse F27 for the main power to the dash cam and F19 for the ACC power line to the dash cam. Pay attention to the direction of the fuse taps (match what's in this video) specifically for the Chevy Traverse, as getting it backwards sends all the power through the original fuse and increases the risk of that fuse blowing within the fuse tap. Dash cam and accessories: Viofo A229 Pro 4K Dual dash cam kit: https://www.amazon.com/dp/B0CKYFSKNN? SanDisk High Endurance Micro SD card: https://www.amazon.com/dp/B07P4HBRMV Viofo HK4 Hardwire kit: https://www.amazon.com/dp/B0CHDXPGP1 Viofo 8m rear cable: https://www.viofo.com/products/viofo-rear-... (strongly recommend you don't try running the cable from front to back exclusively in the head liner material. This didn't work well or look good on the Chevy Traverse. This item will be the longest lead time since it ships from China. Installation tools: Flathead screwdriver (at a minimum to remove the fuse panel cover on the left side of the passenger footwell on the 2024 Chevy Traverse. Pry it from the bottom of the cover.) 7 or 8mm socket wrench (optional, used for the 2nd row airbag cover, easier USB cable routing) Klein Tools Steel Fish Tape with low profile head (https://www.homedepot.com/p/Klein-Tools-50..., Silicone lubricant spray (optional, makes it easier to run the fish tape through rubber boot)