Part 1 , Installation guide of the Innovv K2/3 dash cam, BMW R1250GS, using Hex Ezcan power. скачать в хорошем качестве

Part 1 , Installation guide of the Innovv K2/3 dash cam, BMW R1250GS, using Hex Ezcan power.

HEALTH WARNING: LONG VIDEO. 🤪 UPDATE: March 2024 Time stamp 21:29 ignore the text for the colours of the wires, I typed it wrong!! The video is correct ie Black goes to Black Red goes to Orange Yellow goes to orange/white 00:00 Overview 03:22 Preparation-removal of panels etc 08:57 The installation of the cameras 23:40 The finished installation 👍 Part 1 of 2 (part 2, set up, is nearly finished!) This is how I installed my Innovv K2, which I removed from my previous bike.The k2 has been superseded by the K3. Fitting will be same for the K3, which has extra cables for the remote control and audio feed. I have wired the power directly to the Red Hex Ezcan circuit, which will now NOT give me the motion detection , when the bike is unattended ( this is why it is suggested you wire direct to the battery). Innov had said this is fine to do , notwithstanding the loss of motion detection. Didn't need the motion part, but if in high crime area etc , then I would go with the direct to the battery option!! THE INSTALL , WILL TAKE ABOUT 1 HOUR AND PANELS WERE REMOVED FOR ACCESS. EVERYTHING WORKS AS IT SHOULD , INCLUDING THE GPS DATA. https://innovv.co.uk https://www.hexezcan.com INNOVV K2 purchased from that great chap, Steve at: https://www.abikething.com THE CAMERAS ARE NOT AS GOOD AS A GOPRO, BUT GREAT FOR EVIDENTIAL PURPOSES AND SOME B ROLL FOOTAGE. 🤪