1980s Rusty Bench Grinder Restoration скачать в хорошем качестве

1980s Rusty Bench Grinder Restoration

This 1980s bench grinder was found in an abandoned mechanical workshop, covered in rust, dust, and completely non-functional. It’s a Toshiba CBG-150B, made in Japan, but years of neglect left it in terrible condition. To restore it, we disassembled every part, removed rust with a sandblaster and wire brush, and repaired severely damaged areas through cutting and welding. The casing was repainted to prevent future oxidation, while the internal components, wiring, bearings, and rusted screws were carefully inspected and replaced. After hours of meticulous work, this old bench grinder now runs like new! Watch the full restoration process and don’t forget to leave your feedback! ------------------------- Bench grinder Information * Brand: Tosiba Model: CBG-150B VOLTS: 100V Frequency 50/60 Hz Wheel size: 150mm Shaft: 12,7 mm No load speed: 1360-1600rpm Overall length: 278mm Net Weight : 8kg ------------------------- Timestamps: 00:47 Preview 13:18 Disassembling 13:32 Sandblasting 13:39 Bend and weld dented and severely damaged parts 15:27 Primer and poly putty 13:32 Sandblasting 15:37 Surface treatment with poly putty 16:59 Color paint 17:13 Machine plate bending and painting 18:02 Clean and check the rotor, Stator 19:20 clean the switch 20:07 Clean and blacken screws 21:04 Bearing assembly 21:29 Stator assembly 22:11 Assemble the parts 23:39 Electrical connections, switches, power cords 29:29 Test works with electricity 27:20 Assemble the protective box and grinding disc onto the shaft, pedestal, protective bracket 31:12 Make protective shield, decals, specifications 34:49 Final check and test grind 35:32 Showing the finished restoration ------------------------- Like and subscribe to support the channel ^^ Thank you so much for watching !! Have a nice day ^^ #restoration #restorationvideos #restauration #toolrestoration #tosiba #benchgrinde