Mummy Machine (Glow In The Dark) AMT Model скачать в хорошем качестве

Mummy Machine (Glow In The Dark) AMT Model

This is my Mummy Machine (Glow In The Dark) model made by AMT/MPC/Monster Rods. Photos Start at ..... @7:54 On the kit being in pieces, and somewhat painted. I originally started this kit when I was a kid. I always wanted to finish it, but wanted to wait till I got better at models. Plus, I couldn't figure out how to build the car as a 50/50 combo. The paints I used were clear yellow, blue, red, metallic gold by Tamiya paints. The body was sprayed with clear red transparent by Testors. Few problems I had was I snapped the peg on the rear axle, the my drive shaft didn't fully reach the transmission and had a small gag. The Mummy head when glued together has a nasty line where the two pieces come together. How I fixed mine was I used a sharp exacto knife, and trimmed plastic, and glue from the line.The rear axle is a half axle, and the leaf springs have nothing to lock in when gluing. I filled mine in with JB Weld, drilled, and trimmed the putty so the springs fit nicely, and glued into place. This way the rear is more solid since the leaf springs will be holding the weight axle with the tires.