etrailer | Hands-On with the Lift Spacers for Firestone Ride-Rite Air Helper Springs скачать в хорошем качестве

etrailer | Hands-On with the Lift Spacers for Firestone Ride-Rite Air Helper Springs

Click for more info and reviews of this Firestone Vehicle Suspension: https://www.etrailer.com/Accessories-... Check out some similar Vehicle Suspension options: https://www.etrailer.com/dept-pg-Acce... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Fire... Today we're going to take a look at six-inch lift spacers for the Firestone Ride-Rite Air Helper Springs. Now, this kit will allow your air springs to be installed on vehicles that a a six-inch lift and the distance between the upper and lower brackets must be between 11-1/2 and 12-1/2 inches for these springs to fit. The spacers must be the same size as your lift kit rise.This part will include everything laid out here on the table, the two lift spacers, the hardware to install it and a nice set of detailed instructions for the installation. And the lift spacers are designed to fit axle-mounted air springs. Basically the spacer right here, is what we'll install between the air spring and the lower bracket. The bottom of the spacer is what installs to the lower bracket and then the air spring will attach to the top of the spacer here.Again, the specs for this, it's for vehicles with a six-inch lift and from 11-1/2 to 12-1/2 inches between the upper and lower brackets. Now this will not fit the Ride-Rite models F-2350 or F-2286 but it will fit a version of the F-2286 if it's manufactured after February 01, 2006. But that should do it for the review of the six-inch lift spacers for the Firestone Ride-Rite air helper springs.