Tesla Invader Parallel box mod review (very dangerous) скачать в хорошем качестве

Tesla Invader Parallel box mod review (very dangerous)

Today I found out about two serious design flaws in the Tesla Invader parallel box mod. This mod has the potential to be very dangerous and should be used with extreme caution, the layout of the wiring will only lockout one battery if the pptc fuse is tripped, and the fuse is only rated at 10A trip current. Meaning if you build anything below a .12 using 35A continuous discharge batteries you are running the risk of venting one of your batteries. The second flaw is that the momentary switch (firing button) is only rated at 3A, yes, that's only 3, repeat, three amps, not a typo. Small revision, I should have said mosfet OR a better button. If you rewire this mod with a mosfet you can continue to use the original button, because the mosfet works like a relay and will only draw less than one amp to trigger. Also, a momentary button rated at or above 70 amps is very hard to come by and is expensive. Vape safe everyone, remember if your going to build sub ohm and especially super-sub ohm coils please know ohms law and basic electronics formulas before doing so, and make sure your build won't exceed the maximum discharge rating of your battery. 4.2V%R=I (max battery voltage divided by coil resistance equals current draw)