QAV400 V3 - Multirotor Test Stand - PID Tuning 01 скачать в хорошем качестве

QAV400 V3 - Multirotor Test Stand - PID Tuning 01

Here's the first actual performance test using my new test stand. I'm not really sure how my quadcopter should react on a stand like this but I'll use this as a starting point for PID tuning. If you have any feedback or suggestions, please feel free to comment! SAFETY FIRST! I wear safety glasses during all of these tests and I have a fire extinguisher next to me, ready to go! If you want to learn more about my test stand, go here: http://diydrones.com/group/arducopter... If you want to see how I modified my QAV400, go here: http://diydrones.com/forum/topics/qav... If you're planning to build a QAV400, here's my original build log that uses all of the stock parts: http://fpvlab.com/forums/showthread.p... Current Specs: Lumenier QAV400 frame / DIY hybrid lower frame Lumenier FX2216-9 1100KV motors Lumenier 30A SimonK ESCs APM 2.6 flight controller with uBlox GPS/compass kit 3D Robotics telemetry radio FrSky X8R 2.4GHz receiver Graupner 9x5 E-Props QAV Quick-mount 2-axis brushless gimbal GoPro Hero3 Black camera Lumenier CS-600 FPV camera Flytron TVS-2 remote camera switch MinimOSD ImmersionRC 5.8GHz 600mw Tx ImmersionRC Uno 5800 V2 Rx IBCrazy 5.8GHz Bluebeam Ultra antennas Lumenier 5200mAh 4S battery Thanks for watching! Please Subscribe!! =)