У нас вы можете посмотреть бесплатно Retekess TD157 Restaurant Calling Queuing Wireless Pager System 16*Pagers или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
INSTRUCTIONS 1. Notes 1.1. All the extension pagers should be placed in the main unit charging slot before the operation, and be set up after charging for 20 minutes. 1.2. Power on: Place all extensions in the main unit's charging slot. After the main unit is powered on, the extension will automatically turn on. 1.3. Power off: Place all extensions in the main unit's charging slot. Input “99/999” by the base keyboard and then press the [Call] button. 1.4. Enter the setup mode: Press the [Call] button and the [Clear] button at the same time until the host screen displays [F1], then enter the mode selection interface. At this time, input the corresponding number “1-4”by the keyboard to choose the mode, and press the [Call] key to enter the setting mode. After setting, press [Clear] to exit the setting mode, and the standby screen will display “--”. 1.4.1. Enter the number "1": [F1] Host ID number setting 1.4.2. Enter the number "2": [F2] Extension ID number setting 1.4.3. Enter the number "3": [F3] buzzer switch setting 1.4.4. Enter the number "4": [F4] prompt duration setting 1.5. Operation process: First set [F1] host ID number setting, followed by [F3] buzzer switch setting and [F4] prompt duration setting. After completing the above operations, finally set the [F2] extension ID number. 2. 【F1】Host ID number setting Enter the setting mode, the default screen flashes the current host ID number.At this time, after entering the new number “001-999” by the host keyboard,press the [Call] button to save. Note: If there is no special requirement, please do not modify the host base number. Otherwise, all extensions need to be reset to use the number. Do not set the base number to “000”. 3. 【F2】Extension ID number setting 3.1. First remove all extensions from the base, then enter the setup mode, and the default screen flashes "01". After the extension to be set is inserted into the charging slot, the function light flashes. Then input the new ID number “1-998”by the keyboard within 3 seconds, and press the [Call] button to save. At this time the extension prompts the flash to be set successfully. After removing the extension, set the next one in turn, and then press [Clear] to exit after all extension settings are completed. 3.2. Do not set "99/999" as the extension number. This number is the shutdown command. 3.3. To modify the extension number, simply overwrite the old number with the new one. 4. 【F3】Beep switch setting Enter the setting mode, the default screen flashes “01”. At this time, after inputting “0 (off)/1 (on)” from the keyboard, press the [Call] button to save. 5. [F4] prompt duration setting Enter the setting mode, the default screen flashes “01”. At this time, after inputting “1-99” seconds from the keyboard, press the [Call] button to save. US https://www.ebay.com/itm/313224679237 AU https://www.ebay.com.au/itm/303503032018 DE https://www.ebay.de/itm/283809168270 UK https://www.ebay.co.uk/itm/284057359673