Dr fixit fiber mesh скачать в хорошем качестве

Dr fixit fiber mesh

   / @saharawaterproofingco   Fosroc brushbond RFXcoating system ‎@SaharaWaterproofingCo  #basf #sika #epoxy #waterproofing #waterproofingbangalore #saharawaterproofingco #waterproofingsolutions #waterproofingexpertise #sika #everdrywaterproofing #contractor #cico #paints #sika #fosroc #epoxy Glass fiber mesh waterproofing treatment 👇 Cleaning the surface and preparation etc Grove the crack with machine cleaning the surface filling with PMM Dr Fixit methodology above that application 👇 apply Dr Fixit URP or Primeseal A on the well prepared groove, allow to cure tack free. Followed by filling the all joints covering the entire area uniformly with suitable chemical . Allow chemical to cure a minimum 24 hours. Apply minimum 50mm - 100 mm width 45 GMS Glass Fibre Mesh / non-woven geo textile fleece with the coat of Dr. Fixit Roofseal Classic along the length of crack when the 1st coat is still in wet condition. Apply the second coat with an interval if 4-6 hours. Waterproofing: Apply a coat of Dr. Fixit Roofseal Classic (diluted with water in the ratio 2:1) as Self Priming 14.0 – 18.0 Sq.mt / litre. Allow coating to dry for 3-4 hours. Apply two coats of Dr. Fixit Roofseal Classic / litre / coat, without , the rate of application being the same for both the coats. This would ensure correct consumption of material that will deliver a total DFT of microns. Allow the system to air cure for 5 days minimum. Check to see no void surface is left untreated / uncoated. The material having following technical Specification as per ASTM D 6083 M – Type II, Attains a Tensile Strength of 2.5 N/mm2 confirming to ASTM D 2370; Elongation at break ≥ 300% confirming ASTM D 2370, Adhesion to Concrete 2.0 N/mm2 confirming ASTM D 4541 and Crack bridging ability up to 2 mm, Air cure the coating for 7 days, before water pound test for 48 hrs. The system comes with 10 years waterproofing warranty from service provider . For vertical surfaces: Apply a 2 coat of Dr. Fixit Roofseal Classic with forced coverage of / litre / Coat. Entire terrace should be coated with Roofseal Classic along with parapet walls needs to be enveloped with Roofseal Classic / system. The Total 4coats treatment Total 5 layer solutions