How to Burn a Bootloader and firmware to your Maker Select v2 скачать в хорошем качестве

How to Burn a Bootloader and firmware to your Maker Select v2

In this video I explain how to Burn a bootloader to your Maker Select v2 main board and flash firmware to it. *Note: You may need to download an older version of the Arduino IDE as a lot people seem to have problems getting the latest version to work with this firmware. I was using 1.8.3 in the video, but another commenter said they got it to work with 1.6.9* Arduino Website: https://www.arduino.cc/en/Main/Software Sanguino Board Github: https://github.com/Lauszus/Sanguino You will need to install the u8glib.h library in your Arduino IDE if you haven't done that in the past: https://code.google.com/archive/p/u8g... Download the above zip file, in the Arduino IDE go to Sketch - Include Library - Add .ZIP library and choose the zip file you just downloaded. **Note: if you write this firmware to your printer and the temperatures of your hotend or bed are unusually high when they're turned off, you may want to try changing the EXT0_TEMPSENSOR_TYPE from 14 to 97 for your hotend or HEATED_BED_SENSOR_TYPE for your bed. Repetier FIrmware: https://www.dropbox.com/s/ec6eihhk7i0... Configuration.h file on Github: https://github.com/repetier/Repetier-... Arduino Uno: https://www.amazon.com/gp/product/B00... Jumper Wires: https://www.amazon.com/gp/product/B07...