NEW! TWIN 80 Freewing RC A-10 Thunderbolt V2 Review, 飞翼模型新款双80涵道A10疣猪像真航模飞机测评 скачать в хорошем качестве

NEW! TWIN 80 Freewing RC A-10 Thunderbolt V2 Review, 飞翼模型新款双80涵道A10疣猪像真航模飞机测评

My A-10 is a PNP version. All the electronic equipment has been installed. The factory completion is very high. It takes about 30 minutes to install the machine. The main time-consuming part is to insert a bunch of wires (tail servo, power line) of the tail into the fuselage. The installation of real parts is very user-friendly. All parts can be inserted tightly and can be pulled out when packing. There are three water stickers for the whole machine. I chose the shark mouth pattern, which took about 1 hour. The workmanship of this aircraft is very exquisite. The surface of the EPO foam material is painted thickly, and the shape of the foam is almost invisible, and the hardness is very high. There are some engraved details on the surface, combined with the rich realistic parts and the unique appearance of the Warthog, the outdoor effect is full. The flap rudder uses four independent rudders, and the landing gear is three white-painted all-metal retractable landing gears, combined with the super-bright navigation lights and formation lights of the whole aircraft, the realism is very good. In terms of flight performance, the straight wings of the A-10 give it the feel of a traditional sports aircraft model, and the high double 80 power cabin does not have any strange feel when the throttle is large or small, and the flight feels very light. It is also no problem for aerobatics, and basic stunts such as somersaults and rolls can be completed very beautifully. Brand: Freewing Model: A-10 Thunder Power: Dual 80mm electric ducts Batteries required: 2*6S 5000mAh batteries Equipment used by Haozi: ‪@FrSkyOfficial‬ Frsky X20RS remote control, Dapu 6S 4200mAh 75C LiPo battery 我的这架A-10为PNP配置的版本，所有的电子设备已经安装完毕，出厂完成度很高，到手装机大约需要30分钟，主要耗时的地方就是尾翼的一堆线（尾舵机、动力线）穿入机身中。像真零件的安装非常人性化，所有的零件均可紧密插入并且可以在装箱时拔出。全机的水贴纸有三种可选，我选择了鲨鱼嘴图案的，大约用时1小时。 这架飞机的做工非常精美，EPO泡沫材质表面有厚实的喷漆，几乎看不出泡沫的形状，而且硬度非常大。表面有一些刻线细节，配合上丰富的像真件和疣猪独特的外观，外场效果满满。襟翼舵面采用了四个独立舵面，起落架为三个白色喷漆的全金属可收放起落架，配合上全机超亮航灯、编队灯，像真度非常好。 飞行性能上，A-10的平直翼让它有着传统运动机航模的手感，高高的双80动力舱在大小油门时也没有任何奇怪的手感，飞行感觉上十分轻盈。特技飞行它也不在话下，筋斗、横滚等基础特技动作可以完成的非常优美。 品牌：飞翼模型 机型：A-10雷电 动力：双80mm电动涵道 需要电池：2*6S 5000mAh电池 昊子使用的设备： 睿思凯X20RS遥控器，达普6S 4200mAh 75C锂电池